|Year : 2021 | Volume
| Issue : 5 | Page : 207-211
|COVID-19 pandemic: Cleaning and disinfection – What should the radiologist know?
Binit Sureka1, Sarbesh Tiwari1, Pawan Kumar Garg1, Taruna Yadav1, Pushpinder Singh Khera1, Vibhor Tak2, Sanjeev Misra3
1 Department of Diagnostic and Interventional Radiology, All India Institute of Medical Sciences, Basni, Jodhpur, Rajasthan, India
2 Department of Microbiology, All India Institute of Medical Sciences, Basni, Jodhpur, Rajasthan, India
3 Director and CEO, All India Institute of Medical Sciences, Basni, Jodhpur, Rajasthan, India
Click here for correspondence address and email
|Date of Submission||06-May-2020|
|Date of Acceptance||17-Jul-2020|
|Date of Web Publication||23-Jan-2021|
|How to cite this article:|
Sureka B, Tiwari S, Garg PK, Yadav T, Khera PS, Tak V, Misra S. COVID-19 pandemic: Cleaning and disinfection – What should the radiologist know?. Indian J Radiol Imaging 2021;31, Suppl S1:207-11
|How to cite this URL:|
Sureka B, Tiwari S, Garg PK, Yadav T, Khera PS, Tak V, Misra S. COVID-19 pandemic: Cleaning and disinfection – What should the radiologist know?. Indian J Radiol Imaging [serial online] 2021 [cited 2021 Mar 1];31, Suppl S1:207-11. Available from: https://www.ijri.org/text.asp?2021/31/5/207/307708
| Introduction|| |
The current outbreak of the novel coronavirus SARS CoV-2, epi-centred in Hubei Province of the People's Republic of China, has spread to many other countries. On 30th January 2020, the WHO Emergency Committee declared a global health emergency based on the growing case notification rates at Chinese and international locations. As of 3rd May 2020, the Ministry of Health and Family Welfare have confirmed a total of 26535 cases and 1223 deaths in the country since its first case on 30th January.
Cleaning and disinfecting activities in hospitals are critical for preventing healthcare-associated infections. The purpose of this article is to consider the effects of COVID-19 on the imaging equipment, with particular consideration from the guidelines currently available from the Centers for Disease Control and Prevention, Ministry of Health and Family Welfare that may be applicable to radiology. General principles to be followed while cleaning and disinfecting the radiology facilities and equipment are listed in [Table 1]. Various chemical disinfectants available in the market are highlighted in [Table 2] and [Figure 1], [Figure 2].
|Table 1: General principles to be followed for cleaning and disinfection|
Click here to view
|Table 2: List of chemical agents for cleaning and disinfection,,|
Click here to view
[TAG:2]Cleaning and Disinfection of Radiology Department,,[/TAG:2]
- Radiology reporting rooms, office spaces, waiting areas and conference rooms should be cleaned every evening after office hours or early in the morning before the rooms are occupied
- If contact surface is visibly dirty, it should be cleaned with soap and water prior to disinfection. Prior to cleaning, the worker should wear disposable rubber boots, gloves (heavy duty), and a triple layer mask
- All indoor areas should be mopped with a disinfectant with 1% sodium hypochlorite or phenolic disinfectants
- High contact surfaces such as elevator buttons, handrails/handles and call buttons, public counters, intercom systems, equipment like telephone, printers/scanners and other office machines should be cleaned at least 3-4 times daily by with a linen/absorbable cloth soaked in 1% sodium hypochlorite. Guidelines for preparation of 1% sodium hypochlorite are in [Table 3]
- Frequently touched areas like table tops, chair handles, pens, diary files, keyboards, mouse, mouse pad, tea/coffee dispensing machines etc., should specially be cleaned
- Barrier protective coverings (e.g., clear plastic wraps) can be used for surfaces particularly those that are difficult to clean
- For metallic surfaces like door handles, security locks, keys etc., 70% alcohol can be used to wipe down surfaces where the use of bleach is not suitable
- Hand sanitizing stations should be installed in office premises (especially at the entry) and near high contact surfaces.
|Table 3: Guidelines for Preparation of 1% sodium hypochlorite solution|
Click here to view
| Cleaning and Disinfection of Radiology Equipment|| |
General mandatory principles for cleaning and disinfecting radiology equipment are listed in [Table 1].
Parts: Main equipment, touch user interface, monitors, keyboard, liquid crystal displays (LCD) and detector.
Cover - Wrap the X-ray machine, image receptor and anatomical marker with disposable two-layer double-bagged fluid-impermeable plastic material. The detector should be wrapped in a disposable single-use water impermeable plastic bag and ideally this plastic bag should be changed after every patient.
Cleaning - Only use water or a lukewarm diluted household cleaning agent solution. The use of other than the recommended cleaning agents can result in damage in the equipment. Wipe machine parts with a moist cloth (squeeze out wet cloth before using it) until all contaminations are removed. Remove any watery residues immediately. The back of the X-ray detector should be cleaned first so that it has more time to dry while the front is being cleaned. Appropriate cleaning wipes with vendor-approved disinfectants must be used to clean the detector at least twice daily.
Disinfection – Since the radiography equipment is a non-critical medical device, and also the equipment is wrapped in a cover, it does not require disinfection. However, when there is hazardous spill on the equipment, disinfection may be required. To disinfect surfaces, aldehyde solutions, guanidine derivatives and peroxide compounds should be used. Alcohol-based products should not be used for surface cleaning. After disinfection, wipe the system with a dry soft cloth or let the system dry naturally. Sterilisation is not allowed for X-ray equipment.
Parts: Transducer, console, liquid crystal displays (LCD), touch user interface, monitors and keyboard
- Do not clean the system with chlorinated or aromatic solvents such as isopropyl alcohol
- Do not use spray cleaners on the ultrasound as it may damage the internal components
- Do not pour fluid on the ultrasound system
- Disconnect transducers from the main system before cleaning
- Take extra precautions to clean trackball, touchpad, keys, knobs and side controls
- Ensure fluid does not seep into the openings of system.
Critical item: Ultrasound probe used in sterile body cavities (intraoperative) – should be sterilised using glutaraldehyde or hydrogen peroxide.
Semi critical item: Endocavitory probes - should be treated with high-level disinfectant like glutaraldehyde, hydrogen peroxide, ortho-phthalaldehyde, and peracetic acid with hydrogen peroxide.
Noncritical item: probes used in intact skin – should be treated with low-level disinfectant.
Cleaning the transducer: Dip the transducer (not cable) in clean water or soap water to remove all foreign material or wipe the transducer with moist sponge. Avoid using a brush. Dry the transducer with a clean cloth.
Disinfecting the transducer: Immerse the transducer (not cable) into a solution (22% hydrogen peroxide or 4.5% peroxyacetic acid or 2.4% glutaraldehyde) for 10–12 hours. After this, rinse the transducer with water to remove all chemical residues. Wipe off the water with sterile cloth after this.
Probes used only for external use (linear, curvilinear and phased array transducers) on intact skin without contamination of blood or bodily fluids should be cleaned with low-level disinfection (soap water, quaternary ammonia wipes) between each use.
Probes used externally for percutaneous procedures (vascular access, thoracentesis, paracentesis, arthrocentesis, pericardiocentesis, lumbar puncture, regional anaesthesia and other procedures) should be covered with single-use protective covers and sterile gel applied. They should subsequently be cleaned with low-level disinfection.
Probes used internally on mucous membranes and internal orifices ((endocavitory probe for intraoral procedures/transvaginal examinations and transesophageal probes) should be covered with high-quality single-use probe covers during each examination, followed by high-level disinfection between each use. An alternative procedure for disinfecting the endocavitory probes involves:
- Removing the gel from the transducer
- Cleaning the transducer with soap and water
- Wiping the transducer with 70% alcohol or soak it for 2 minutes in 500 ppm chlorine
- Rinsing with tap water
- Air drying and wiping with cloth.
Computed tomography (CT) scanner system
Parts: Gantry – gantry cover, operator panel, touch panel; Patient table – patient table, mattress; monitor; other components – positioning aids, body straps, ECG cables, foot switch.
Gantry - Before starting the cleaning process, the gantry should be switched off. Remove all impurities like blood and contrast with damp cloth. Cleaning agents and disinfectants recommended for gantry cover, operating panel and touch panel are surgical spirit, alcohol (≤70%), aldehyde, quaternary compounds, guanidine derivatives, pyridine derivatives, chlorine derivatives, benzene, alkylamines, organic acids and peroxide compounds. For the touch panel in the gantry system, use an anti-static cleaner, alcohol-free glass cleaning fluid or a solution of water and a pH-neutral cleaning agent. Paper towels are not recommended as these fibrous materials can scratch the screen. Corrosive agents should be avoided as it can damage the surface coating.
Patient table - All chemicals used for cleaning gantry can be used for cleaning the patient table. Mattress should always be covered with plastic sheet for maintaining hygiene. Cleaning agents and disinfectants recommended for mattress are pH-neutral agents, guanidine derivatives, chlorine derivatives and alkylamines. Soft brush may be used for regular cleaning. Mattress should not be cleaned with surgical spirit as this may lead to wrinkling. Alcohols and aldehydes should not be used for cleaning mattress.
Monitor - Ensure monitor is switched off before cleaning. Clean the monitor with damp cloth. Only an antistatic cleaner should be used for cleaning the monitor screen. The monitor housing can be cleaned with same materials as used for gantry and surgical spirit should be avoided.
Other components - Patient positioning aids made of foam material and body straps can be cleaned by using pH-neutral agents, guanidine derivatives, chlorine derivatives and alkylamines. Alcohol (≤70%) can be used for cleaning ECG cables.
Disinfection: Spray machine for fogging is not recommended for CT scanner. It should be applied only on floor. Normally technicians/end users never wipe the equipment surface after fumigation, which is the reason for not recommending fumigation.
Bacillocid rasant is a newer and effective compound in environmental decontamination with good cost benefits, good material compatibility, excellent cleaning properties and virtually no residues. It has the advantage of being a formaldehyde-free disinfectant cleaner with low use concentration, provides complete asepsis within 30 to 60 minutes.
Air disinfection – Air exchange of minimum fresh air volume of 3 cum/hour/person and 3.75 cum/hour/sqm is recommended. The recommendation is to maximize supply of outside air within the limits of the system. In buildings without mechanical ventilation systems, it is recommended to actively use operable windows. Installation of UVGI (Ultraviolet germicidal irradiation) for larger ducted units and AHUs to keep coils continuously clean and disinfected is highly recommended. It is advisable to regularly inspect the AHUs and ducts for air tightness and low leakage. Minimum air changes of around 10–15 ACHP (air changes per hour) is advised for good ventilation. The mechanical exhaust air should have 70% to 80% of fresh air. In case of recirculating system, it is recommended to limit return air circulation. Air steriliser or ultraviolet lamp disinfection is being recommended for air disinfection at least 4 times/day. It does not damage electronic or cable components inside the gantry. Low-pressure mercury (Hg) discharge lamps are commonly used in ultraviolet germicidal irradiation (UVGI) applications which emit shortwave ultraviolet-C (UV-C, 100–280 nanometer) radiation, primarily at 254 nm. UV-C radiation kills or inactivates microbes by damaging their deoxyribonucleic acid (DNA). Research has shown that UV-C light has been effective in altering the cell structure and exposure to UV-C light of 254 nm for a period of 20-30 minutes and is effective in deactivating the virus. Usage of ozone and hydrogen peroxide is no longer recommended for air disinfection.
Magnetic resonance imaging (MRI)
Follow the manufacturer's instructions and use only approved disinfectants and cleaning agents. Always use a damp cloth for cleaning. Do not pour chemicals in the scanner.
Cleaning patient table, straps, plugs and connectors: Approved agents are aldehydes, quaternary compounds, guanidine derivatives, peroxide compounds, pyridine derivatives, chlorine derivatives, alkylamines, organic acids and commercially available detergents. Benzene, acetone and alcohol solutions are not recommended.
Receptors: All the chemicals mentioned above can be used for cleaning except chemicals containing alcohol and ethers.
LCD monitors and video display: Ideally should be cleaned thoroughly once every two months. Use commercially available window cleaners in diluted form.
Camera lens, data carrier: Use dry cotton or microfiber cloth for cleaning.
Parts: Compression plates, biopsy unit, object table, patient handles and face shield.
All parts of the unit which come into contact with the patient must be cleaned prior to examination. The plastic trays can be removed from the holder to simplify cleaning.
Wipe the system with a damp, lint-free, non-woven cloth or sponge. Moisten the cloth only with water or lukewarm, diluted and aqueous solution using a household cleanser without abrasives. Anaesthetics and skin disinfectants used during biopsies can damage or discolour the plastic parts of the compression plates. If such substances get onto the compression plates, wipe these off immediately with a moist cloth.
Compression troughs and holders should be disinfected by quaternary ammonium compounds. Alcohol-based products should not be used. Disinfectants based on substituted phenols and chlorine-splitting compounds have a slightly corrosive effect and therefore are not recommended generally.
Hospital policies for disinfection
It is the responsibility of radiology departments, in collaboration with hospital infection control committee and Medical Superintendent Office, to establish policies for disinfecting radiology equipment to manage infection risk. In addition, radiology departments should check with their equipment vendors to determine which disinfectants are safe for radiology equipment. There should be clear cut written SOPs in Radiology Department regarding (i) when to disinfect the facility, (ii) the personnel who will be involved in cleaning, (iii) the specific agents to be used and (iv) the radiologist designated for monitoring and ensuring the disinfection and cleaning.
| Conclusion|| |
In summary, in this war against COVID-19 pandemic, we have to triage patients for appointment, standardise our protocols for imaging and assure technicians and cleaning staff are adequately trained for disinfection and cleaning of equipment as well as the facility. In short, the objects should be disinfected with 1000 mg/L chlorine containing disinfectant once every 4 hours, equipment be disinfected as mentioned in equipment manuals twice a day, air and environment disinfection using air sterilizer or ultraviolet lamp 4 times/day and ground disinfection by 1000 mg/L chlorine containing disinfectant once every 4 hours. A combination of deep cleaning with surface disinfectants and ultraviolet light is the key for the radiologists to prepare themselves in fighting this COVID-19 pandemic. Guidelines are changing and this is not a static document. COVID-19 is a newly discovered virus; the guidelines are evolving so the disinfection policies need to be reviewed on a periodic basis.
| References|| |
Guideline for Ultrasound Transducer Cleaning and Disinfection. Ann Emerg Med 2018;72:e45-7. doi: 10.1016/j.annemergmed. 2018.07.035. PubMed PMID: 30236343.
Garland SM, de Crespigny L. Prevention of infection in obstetrical and gynaecological ultrasound practice. Aust N Z J Obstet Gynaecol 1996;36:392-5.
Dexter F, Parra MC, Brown JR, Loftus RW. Perioperative COVID-19 Defense: An evidence-based approach for optimization of infection control and operating room management [published online ahead of print, 2020 Mar 26]. Anesth Analg 2020;10.1213/ANE.0000000000004829. doi: 10.1213/ANE.0000000000004829.
Dr. Binit Sureka
Associate Professor, Department of Diagnostic and Interventional Radiology, All India Institute of Medical Sciences, Jodhpur - 342 005, Rajasthan
Source of Support: None, Conflict of Interest: None
[Figure 1], [Figure 2]
[Table 1], [Table 2], [Table 3]
| Article Access Statistics|
| Viewed||376 |
| Printed||0 |
| Emailed||0 |
| PDF Downloaded||22 |
| Comments ||[Add] |